Sheldon 9490534 Stacking Plate Set for Sheldon Signature HEPA Clean CO2 Incubator is a reliable and dependable addition to the Sheldon Baths, Ovens, Incubators, and Cryogenics Storage family of products. Combining top-notch and uncompromising quality with an affordable price, the Sheldon 9490534 Stacking Plate Set for Sheldon Signature HEPA Clean CO2 Incubator can fulfill your laboratory needs while still offering a great value for the money.

Product Category Description:

• Microprocessor Temperature and CO2 Control
• Tempered Glass Door with Heated Outer Door
• Independent Over-Temperature Protection

This VWR Signature CO2 incubator, with its HEPA filtration system and patented copper housing, draws chamber air through the filter system, removing and destroying airborne microbes and isolated particulates. The copper oxidation kills contaminants. The HEPA filter has an efficiency rating of 99.97% at 0.3µm.

A seamless chamber with radius corners makes it easy to clean. An air jacket around the chamber ensures precise temperature uniformity, reducing the possibility of contamination due to condensation within the chamber. Easily removable shelf system further simplifies the cleaning and decontamination process.

An infrared (IR) CO2 sensor ensures accurate detection and control of CO2 levels in chamber. Unaffected by changes in temperature and humidity, the sensor quickly detects a change in the CO2 concentration as small as 0.1% and compensates accordingly, allowing for rapid CO2 recovery. Humidification is achieved through natural evaporation of distilled water in the humidity pan.

Stacking plate set includes two plates and hardware for securing two incubators together.

Specifications for Sheldon 9490534 Stacking Plate Set for Sheldon Signature HEPA Clean CO2 Incubator:

Description:		Stacking Plate Set
Unit:		Each
Capacity:		0.16 m3 (5.67 cu. ft.)
Interior Dimensions:		49W x 51D x 65H cm
Exterior Dimensions:		65W x 69D x 96H cm
Shelf Dimensions:		45W x 46D cm (173/4 x 181/4")
Electrical:		115V, 50Hz, 700W
Temperature Range:		8° above ambient to 60°C
Temperature Uniformity:		±0.35° at 37°C
CO2 Setpoint/Setability:		Digital/0.1°C
CO2 Control Range:		0–20%
CO2 Control Accuracy:		±0.1%

(Please note that the description and stock photo may not correspond to the specific model listed above)

We offer only genuine Sheldon products, authorized for sale in the U.S. and other markets, so you can be sure that you are buying authentic Baths, Ovens, Incubators, and Cryogenics Storage with a full manufacturer's warranty in addition to our own 100% Satisfaction Guarantee. We are your premier online distributor for Sheldon Baths, Ovens, Incubators, and Cryogenics Storage. We are an authorized supplier to all federal and state government agencies, as well as to research and educational institutions, and can facilitate volume orders on many types of laboratory equipment, lab consumables, and other products to help fulfill your specific needs. We offer FREE UPS Ground Shipping and FREE USPS shipping to APO and FPO addresses on all orders in our store over $29.95. Please refer to our APO/FPO Shipping and Export Restrictions for more information on export to APO/FPO addresses.

In addition to the Sheldon 9490534 Stacking Plate Set for Sheldon Signature HEPA Clean CO2 Incubator, we carry a full complement of Baths, Ovens, Incubators, and Cryogenics Storage as well as other product offerings from Sheldon. We also carry a full line of Sheldon accessories to help meet your laboratory and scientific needs.

For a complete selection of Sheldon Baths, Ovens, Incubators, and Cryogenics Storage, please visit our Sheldon page. For more brand name Baths, Ovens, Incubators, and Cryogenics Storage please visit our Baths, Ovens, Incubators, and Cryogenics Storage store section. To see our complete line of lab, medical, industrial, and scientific products, please see our science and lab equipment online catalog.

Sheldon 9490534 Stacking Plate Set for Sheldon Signature HEPA Clean CO2 Incubator Rating & Reviews