Product Category Description:
“Design-your-own-bath” circulator combines a programmable controller with flexible circulator placement. Bridge expands from 38.1–63.5cm (15–25") for placement on a variety of containers. The programmable controller features a backlit full-graphics display with set point and actual temperatures displayed simultaneously. A powerful variable-speed pressure/suction pump and RS-232 interface are standard. Circulator also features remote temperature probe capability as well as a full range of software for programming and data logging. The single knob encoder permits intuitive, simplified controller setup and operation. Adjustable audible and visual alarms alert user to out-of-range conditions. Circulator has over-temperature and low-liquid shutdowns for protection. The cooling coil can reduce minimum operating temperature when connected to a water source. The high-temperature tubing is 0.9m (3') of flexible fluoropolymer resin-lined, stainless steel overbraid tubing with 6.4mm (1/4") NPT quick connects on both ends. For use at elevated temperatures. Maximum temperature: 300°C (572°F). The general-purpose clear bath algicide is compatible with stainless steel and helps keep water baths clean, odor-free, and resistant to black algae. One 237mL (8oz.) bottle treats approximately 757L (200gal.). Supplied in a plastic dispenser bottle. Use the concentrated bath cleaner for cleaning and removing rust and minerals deposits from stainless steel and plastic baths. Bath cleaner comes in 473mL (16oz.) bottle; 29.6mL (1oz.) treats approximately 7.6L (2gal.). The remote temperature probes permit point of control to be switched from inside circulator bath to a remote location, such as an open tank. Probes compensate for the heat losses through tubing between the circulator and control point. Feature platinum RTD sensor with 0.4dia.x15.2Lcm (5/32x6") stainless steel sheath. A 2.5cm (1") rubber coupling connects the sheath to the flexible cable. Cable ends in DB9 female plug. The heat transfer fluids provide superior thermal stability for high or low temperatures. The 510 fluid has a temperature range of 50 to 150°C (122 to 302°F), a –70°C (–94°F) freezing point, and a viscosity (in centistokes) of 50 at 25°C. The 710 fluid has a temperature range of 150 to 250°C (302 to 482°F), a –22°C (–7.6°F) freezing point, and a viscosity (in centistokes) of 500 at 25°C. Note: Heat transfer fluids are incompatible with Buna or natural rubber. Ordering Information: Circulators are supplied with two-year limited parts and labor warranty and a 1.8m (6') power cord with standard U.S. plug on 120V models, and European plug on 240V models. Other country-specific plugs are available; contact our sales representative. Specifications for Polyscience Corporation Signature Programmable Immersion Circulator, Model 1127P 7312V1B :
(Please note that the description and stock photo may not correspond to the specific model listed above) We offer only genuine Polyscience Corporation products, authorized for sale in the U.S. and other markets, so you can be sure that you are buying authentic Baths, Ovens, Incubators, and Cryogenics Storage with a full manufacturer's warranty in addition to our own 100% Satisfaction Guarantee. We are your premier online distributor for Polyscience Corporation Baths, Ovens, Incubators, and Cryogenics Storage. We are an authorized supplier to all federal and state government agencies, as well as to research and educational institutions, and can facilitate volume orders on many types of laboratory equipment, lab consumables, and other products to help fulfill your specific needs. We offer FREE UPS Ground Shipping and FREE USPS shipping to APO and FPO addresses on all orders in our store over $29.95. Please refer to our APO/FPO Shipping and Export Restrictions for more information on export to APO/FPO addresses. In addition to the Polyscience Corporation Signature Programmable Immersion Circulator, Model 1127P 7312V1B/ 13271-142, we carry a full complement of Baths, Ovens, Incubators, and Cryogenics Storage as well as other product offerings from Polyscience Corporation. We also carry a full line of Polyscience Corporation accessories to help meet your laboratory and scientific needs.
Store Home » Polyscience Corporation + Constant Temperature Equipment » Polyscience Corporation Constant Temperature Equipment » Polyscience Corporation Signature Programmable Immersion Circulator, Model 1127P 7312V1B Order Polyscience Corporation Signature Programmable Immersion Circulator, Model 1127P 7312V1B from http://www.opticsplanet.net/polyscience-corporation-vwr-signature-programmable-immersion-circulator-model-1127p-7.html Copyright © 1999-2009 OpticsPlanet, Inc. All rights reserved. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||