Celestron T-Rings For 35mm Cameras

Celestron T-Rings couples your 35mm camera body to a T-Adapter, Radial Guider or Tele-Extender.
This accessory is required if you want to do any type of photography through a telescope or spotting scope. Each camera manufacturer has a different mount, which requires a specific T-Ring, so Celestron offers a full line of T-Rings.

To use a Celestron T-Ring For 35mm Cameras, remove the diagonal and/or eyepiece from your Celestron Telescope (some models require use of an eyepiece — see your instruction manual). Then you need only remove your normal camera lens, attach the proper T-Ring for your camera, and mount the combination to the rear cell of your Celestron Telescope or Celestron Spotting Scope with a Celestron T-Adapter.

If you own an older SLR camera with a thread mount, it will probably accept the Pentax Universal Thread Mount T-Ring. If you have a new camera with a bayonet mount not listed above (Ricoh, Cosina, etc.), it most likely accepts the Pentax K-Universal Bayonet Mount T-Ring. Check your camera’s instruction manual for more detailed information.

Store Home > Accessories > Telescope Accessories > Celestron Telescope Accessories > Celestron T-Rings For 35mm Cameras
Store Home > Celestron > Celestron Accessories > Celestron Telescope Accessories > Celestron T-Rings For 35mm Cameras

Order Celestron T-Rings For 35mm Cameras from http://www.opticsplanet.net/celestron-rings-35mm-cameras.html