Aimpoint CompM4 & CompM4s Red Dot Sights with FREE Gerber Suspension Multi-Plier

OpticsPlanet is proud to present the Aimpoint CompM4 Red Dot Sight. The Aimpoint CompM4 Red Dot Scope is the latest version of the US Army's M68 CCO (Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997. The Aim-point CompM4 Red Dot Scopes are the finest sight that Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery! The Aimpoint Comp M4 Red Dot Scope 11972 incorporates an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems. This Red Dot Scope by Aim-Point can also be used by hunters and sport shooters that need night vision compatibility. These Aim Point Red-Dot Sights are available with a regular (11972) or low (12172) battery compartment.

The performance of the Aim-Point CompM4 Red-Dot Sight is optimized for use with all generations of night vision devices (NVDs), but is especially suited for Gen 3 Night Vision. Aimpoint's unique band-pass coating on the front lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness with the smallest amount of energy while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a Gen 3 Night Vision. With 7 NVD-compatible brightness settings and 9 Daylight settings including one extra-bright setting, this Aimpoint red dot sight is ready for use around the clock.

• 11972: Aimpoint CompM4 Red Dot Sight
• 12172: Aimpoint CompM4s Low Battery Compartment Red Dot Sight

Each model comes with a FREE Gerber Suspension Multi-Plier 1471, a $34 value. This Gerber Tool contains needlenose pliers, wire cutter, fine edge knife, serrated edge knife, saw, scissors, crosspoint screwdriver, small and medium flatblade screwdrivers, can opener, bottle opener and lanyard hole.

OPTICAL DATA
System:		Passive Red Dot Collimator Reflex Sight
Magnification:		1X
Eye relief:		Unlimited
Reticle, size:		2 MOA
Optical coating:		Anti Reflex coating all surfaces. Multi-layer coating for reflection of red light. Band Pass coating for NVD compatibility
ELECTRONIC DATA
Battery Type:		AA
Battery Life, typical:		80 000 hours for good quality battery
Switch, dot brightness:		16 positions, 7 NVD, 9 daylight, of which 1 Extra Bright
MECHANICAL DATA
Material housing:		Extruded high strength aluminum
Surface finish:		Hard anodized, matte, Black
Material lens covers:		rubber, black matte
Adjustment:		1 click = 16 mm at 100 meters = 1/2" at 80 yds
Mounting:		Keyed surface Patent pending mount keyed to the sight body to absorb recoil
DIMENSIONS
Length:		120 mm (4.7")
Width/height:		53x60 mm (2.1"x2.4") sight only - 72x72 mm (2.8"x2.8") including mount
Ring width:		none
Weight, sight only:		265 g (9.3 oz)
Weight, with integrated mount:		335 g (11.8 oz)
ENVIRONMENTAL DATA
Temperature Range:		-45 °C to +71 °C (-50 °F to +160 °F)
Water resistance:		45 m (150ft)

• Compatible with every generation of Night Vision (NVD)
• Super ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
• Internal voltage regulator allows the CompM4 to be used with any AA size battery.
• Seven night vision compatible settings and 9 daylight settings
• QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear.
• Mount base is "keyed" into to the body of the sight to absorb recoil.
• Mount base screws directly into the sight - no separate sight ring is required.
• 500,000 hours of use on NVD setting
• 2 MOA dot for close combat and long distance engagement
• Matches perfectly with Aimpoint 3x Mag, (magnifier module).
• Unequalled light transmission.
• Front lens opening is threaded for addition of killFlash® anti-reflective device.
• Submersible to 150 feet (45 meters)
• Vertical spacer included
• Standardized as the US Army's new M68 CCO
• Improved adjustment caps are easier to remove, and are protected against impact.
• Can be used with a carry handle adaptor for use on all M16 rifles.
• Offered in low battery compartment version (Comp M4s 12172)

• Aimpoint CompM4 Red Dot Sight 11972
• Gerber Suspension Multi-Plier 1471

• Aimpoint CompM4s Red Dot Sight 12172
• Gerber Suspension Multi-Plier 1471

Aimpoint CompM4 & CompM4s Red Dot Sights with FREE Gerber Suspension Multi-Plier


FREE Gerber Suspension Multi-Plier 1471

Order Aimpoint CompM4 & CompM4s Red Dot Sights with FREE Gerber Suspension Multi-Plier from http://www.opticsplanet.net/aimpoint-compm4-red-dot-sight-11972.html