Product Category Description:

• Built-in Safety Cutoff for High-Temperature and Low-Liquid Level Protection
• VWR Two-Year Limited Parts and Labor Warranty

Ideal for direct immersion of samples or circulating through external systems. The standard controller features a two-speed pressure pump and an easy-to-set temperature encoder with three user-set presets to allow for rapid setpoint change. The analog controller features accurate, proportional temperature control and includes a thermometer for temperature readout.

The 6L (1.6gal.) baths provide precise, stable temperature control down to –20°C (–4°F). The 21cm (81/4") wide footprint helps conserve precious bench space. Baths have a cooling capacity of 200W at 20°C (68°F), 140W at 0°C (32°F), and 100W at –10°C (14°F).

Energy-efficient 13L (3.4gal.) baths combine high heat removal with a large reservoir and work with temperatures as low as –40°C (–40°F). Model 1150S has a cooling capacity of 660W at 20°C (68°F), 480W at 0°C (32°F), and 100W at –30°C (–22°F). Model 1190S has a cooling capacity of 680W at 20°C (68°F), 450W at 0°C (32°F), and 160W at –30°C (–22°F).

The 28L (7.4gal.) baths are for immersing large numbers of samples. The large capacity of this reservoir helps compensate for unexpected heat load changes. The large bath opening allows convenient access and has a large workspace on top. Baths have a cooling capacity of 700W at 20°C (68°F), 510W at 0°C (32°F), and 260W at –20°C (–4°F).

The 120V models are CSA certified. The 240V models are CE approved.

The general-purpose clear bath algicide is compatible with stainless steel and helps keep water baths clean, odor-free, and resistant to black algae. One 237mL (8oz.) bottle treats approximately 757L (200gal.). Supplied in a plastic dispenser bottle. Use the concentrated bath cleaner for cleaning and removing rust and minerals deposits from stainless steel and plastic baths. Bath cleaner comes in 473mL (16oz.) bottle; 29.6mL (1oz.) treats approximately 7.6L (2gal.).

The high-temperature tubing is 0.9m (3') of flexible fluoropolymer resin-lined, stainless steel overbraid tubing with 6.4mm (1/4") NPT quick connects on both ends. For use at elevated temperatures. Maximum temperature: 300°C (572°F).

The Dynalene® HC 50 heat transfer fluid provides superior thermal stability for high or low temperatures. Fluid has a temperature range of –53 to 60°C (–63 to 140°F), a –56°C (–68.8°F) freezing point, and a viscosity (in centistokes) of 3.6 at 0°C (32°F) and 15.1 at –40°C (–40°F).

Note: Heat transfer fluid is incompatible with Buna or natural rubber.

Ordering Information: Includes lid; 0.6m (2') bypass tube; male inlet/outlet tubing adapters for 0.95cm (3/8"), 0.64cm (1/4"), and 0.48cm (3/16") tubing; and 1.8m (6') cord with standard U.S. plug on 120V models, European plug on 240V models. Other country-specific plugs are available; contact our sales representative. Ethylene glycol is available at vwr.com.

Specifications for Polyscience Corporation Heated/Refrigerated Circulators 9506V11C Circulators With Standard Controller :

Capacity,L (gal.):		13 (3.4)
Working Access,L x W x D, cm (in.):		14 x 28 x 15.2 (51/2 x 11 x 6)
Case Dimensions,H x W x D, cm (in.):		62.9 x 39.4 x 43 (243/4 x 151/2 x 17)
TemperatureRange, °C (°F):		–30 to 150 (–22 to 302)
Electrical:		120V, 60Hz, 13A
Unit:		Each (13 L)
Stability (Standard Controller):		±0.05°C
Stability (Analog Controller):		±0.2°C
Readout Accuracy (Standard Controller):		±0.5°C
Pressure Flow Rate:		9 or 15 L/min.
Heater, For 120V, 60Hz Models:		1100W
Heater, For 240V, 50Hz Models:		1600W
Heater, Pump Inlet and Outlet:		0.64 cm (1/4") FPT

(Please note that the description and stock photo may not correspond to the specific model listed above)

We offer only genuine Polyscience Corporation products, authorized for sale in the U.S. and other markets, so you can be sure that you are buying authentic Baths, Ovens, Incubators, and Cryogenics Storage with a full manufacturer's warranty in addition to our own 100% Satisfaction Guarantee. We are your premier online distributor for Polyscience Corporation Baths, Ovens, Incubators, and Cryogenics Storage. We are an authorized supplier to all federal and state government agencies, as well as to research and educational institutions, and can facilitate volume orders on many types of laboratory equipment, lab consumables, and other products to help fulfill your specific needs. We offer Free Shipping and FREE USPS shipping to APO and FPO addresses on all orders in our store over $29.95. Please refer to our APO/FPO Shipping and Export Restrictions for more information on export to APO/FPO addresses.

In addition to the Polyscience Corporation Heated/Refrigerated Circulators Circulators With Standard Controller 9506V11C/ 13271-098, we carry a full complement of Baths, Ovens, Incubators, and Cryogenics Storage as well as other product offerings from Polyscience Corporation. We also carry a full line of Polyscience Corporation accessories to help meet your laboratory and scientific needs.

For a complete selection of Polyscience Corporation Baths, Ovens, Incubators, and Cryogenics Storage, please visit our Polyscience Corporation page. For more brand name Baths, Ovens, Incubators, and Cryogenics Storage please visit our Baths, Ovens, Incubators, and Cryogenics Storage store section. To see our complete line of lab, medical, industrial, and scientific products, please see our science and lab equipment online catalog.