Millett Tactical Rings, Rails, Mounts, and Mounting Systems on sale and available from our online store. OpticsPlanet, Inc is an Authorized US Distributor for Millett Riflescope Mounts, Rings & Bases.

TACTICAL RINGS Millett Tactical Rings are a light-weight, strong solution for the most demanding uses. 6 cap-clamping screws positively hold your scope, no matter the level of recoil and the base clamp holds the scope to the base. High and medium heights come in a matte finish. Millett tactical rings are your answer to demanding mount needs.

TACTICAL SCOPE RING W/ACCESSORY RAIL Millett's new Tactical Accessory Mount Scope Ring allows the mounting of lights, lasers, back-up sights and other items above the objective of 30mm scopes. Simple Picatinny rail mount allows easeof- mounting with clamping-type Weaver rings. Available in low, medium, and high ring heights. Positive, sure mounting for your scope and easy-to-use accessory mount all-in-one.

GRABBER The Grabber, in 1 inch and 30mm, is the answer for quick, easy, repeatable mounting of scopes and other tactical tools, such as lights and lasers on Weaver, Picatinny-type rails. Manufactured with heat-treated steel for strength, the Grabber returns to zero every time. A 5-to-1 mechanical advantage locks the Grabber to the rail without cams and weak components. For quick, positive mounting, go with the Grabber.

PICATINNY RAILS Millett's Picatinny Rails are offered for the Remington 700 LA + SA right hand, Savage Accutrigger LA + SA right hand, and also in the blank tactical. The easy, strong mounting system is similar to US military 1913 mounts. You can mount a wide range of optics using this rail, from red dots to large target scopes. The rails are heat treated T6 aluminum, black anodized with all required hardware for mounting. Millett's Picatinny Rails are priced right and give that custom look to any rifle. Risers for rimfire rifles are available in two models – one for bolt action and one for semi-automatic.

22 RISER RAILS Risers for rimfire rifles are available in two models — one for bolt action that is cut out for easy loading and the other for semiautomatic. Allows easy mounting of large objective scopes

M4 RISER RAILS Millett's M4 riser allows the mounting of scopes and other optics on flat top AR, M4 and other rifles using normal height scope rings. Solid and secure, the M4 riser allows proper cheek position for these style firearms. Riser clamps onto any Picatinny/Weaver-type base.

NEW 20 MOA RAILS For long range rifle shooting many scopes do not have adequate adjustment for elevation to zero at the extended yardages. By using a Picatinny rail that is higher in the rear area than the front, such as our 20 MOA rail you can align your scope and give greater elevation adjustment. Millettís 20 MOA rail is manufactured to the highest standards using T6 aluminum for Remington and Savage bolt action rifles.

NEW M1A — M14 MOUNTING SYSTEM Improved over the military and civilian bases of the past, the Millett M1A mount is solid T6 and fits all military and aftermarket receivers. Requires removal of the striper clip guide at the rear receiver just in front of the rear sight. Improved thumb screw for easy tightening. Clamping screw on the forward part of the rail to assure zero. Positive hold and easy to remove and install. Strong enough for the largest scope, the M1A mount is ready for any mission.

NEW M16 HANDLE MOUNT Simple one nut installation on the carry handle of any standard M16 AR15 type rifle the Millett M16 mount is easy to use and gives the shooter a quick mount for scopes and sights like the Zoom Dot. The rails extended length allows a wider range of mounting options for scopes and reflex sights. Strong T6 aluminum and precision machined Picatinny rail to give the best accuracy, the Millett M16 rail mount is an excellent mounting solution. No tools required to install Millett M16 mount.

• Millett DT00713 30mm Low Matte Tactical Detachable, Clam
• Millett DT00714 30mm High Matte Tactical Detachable, Clam
• Millett DT00715 30mm Medium Matte Tactical Detachable, Clam
• Millett DT00716 30mm Low Matte Tactical w/Accessory Rail, Clam
• Millett DT00717 30mm Medium Matte Tactical w/Accessory Rail, Clam
• Millett DT00718 30mm High Matte Tactical w/Accessory Rail, Clam
• Millett GB00001 1" Medium Smooth Grabber, Clam
• Millett GB00002 1" Medium Matte Grabber, Clam
• Millett GB00003 1" Medium Engraved Grabber, Clam
• Millett GB30001 30mm Medium Smooth Grabber, Clam
• Millett GB30002 30mm Medium Matte Grabber, Clam
• Millett PC00001 Picatinny Rail Matte Remington 700 Short Action RH, Clam
• Millett PC00002 Picatinny Rail Matte Savage 110 AccuTrigger Short Action RH, Clam
• Millett PC00003 Picatinny Rail Matte Blank Tactical, Clam
• Millett PC00005 Picatinny Rail Matte Remington 700 Long Action RH, Clam
• Millett PC00006 Picatinny Rail Matte Savage 110 AccuTrigger Long Action RH, Clam
• Millett PC00014 M1A/M14 Riser, Matte
• Millett RI00001 Tip Off Riser Matte .22 semi-auto, Clam
• Millett RI00002 Tip Off Riser Matte .22 Bolt Action, Clam
• Millett RI00003 M4 Riser Matte for flat top, Clam

We offer complete line of Millett Riflescope Mounts, Rings & Bases. For our complete selection of products by Millett on sale please visit our Millett page. For more Riflescope Mounts, Rings & Bases please visit our Riflescope Mounts, Rings & Bases store section.

Millett Tactical Rings, Rails, Mounts, and Mounting Systems Rating & Reviews

Average Rating Not Yet Rated Review & Rate