Labnet Enduro Page 2d System E2010-P2 is on sale and available from our online store. OpticsPlanet, Inc is an Authorized US Distributor for Labnet Laboratory Apparatus.

Labnet's Enduro Vertical PAGE System is modular - allowing PAGE, electroblotting and 2D gel electrophoresis to be carried out in the same tank, simply by changing theinserts. Users can purchase only the parts they need, or a complete combined system for a cost savings over buying all three systems separately. MODULAR SYSTEM - The modularity of the Enduro System is based on three operational inserts and a common buffer tank. All threeinserts, PAGE, electroblotting and 2D electrophoresis, have their own electrode assembly that connects into the lid of the buffer tank. PAGE INSERT - Set up of gels is quick and easy with the PAGE insert. A set of plates are placed on either side of the insert andheld into place by the pressure bar. An additional gel may be run on each side by stacking the plates. The assembly is then placed into the casting stand for pouring the gel. After the gel is polymerized, the insert is removed from the casting stand and placed in the buffer tank.Modular Tank with PAGE Insert ELECTROBLOTTING INSERT - The electroblotting insert has a capacity for 3 gels. Setting up blots is easy - gels are sandwiched in the blotting cassettes with the transfer membranes. The cassettes arethen placed in the insert, which is in turn placed in the buffer tank. Coiled electrodes in the insert generate a highintensity current, allowing transfer to take place in about an hour.Blotting Module 2D ELECTROPHORESIS INSERT - This insert is used for running the first dimension of IEFgels. Up to ten 8 cm gels are poured in disposable capillary tubes and placed in this insert. Gasketed ports allow for easy insertion and removal of tubes. Blocking plugs are included for closing off ports that are not in use.2D Module BUILT FOR SAFETY AND ENDURANCE - For leakproof performance and a long service life, the buffer tank is molded from high quality acrylic. Pins on the top of the inserts ensure that the lid is placed onto the insert in the proper orientation. These pins also aid in removal of the lid. Removing the lid disconnects power tothe electrodes. ACCEPTS MOST PRE-CAST GELS - Most precast gels, including NuSep, Bio-Rad, Invitrogen and Cambrex can be used with the Enduro PAGE System. The use of precast gels saves time by eliminating the need to pour gels and wait while they polymerize. WIDE RANGE OF ACCESSORIES - A variety of combs and spacers of varying widths areavailable to customize your Enduro system. All are color coded and clearly marked for easy identification. Both notched and plain plates can be purchased with spacerspermanently bound for easy set up. Additional fiber pads and replacement cassettes are also available as well ascapillary tubes, blanking ports and tube supports. Cooling packs are also available to help reduce buffer temperature during higher voltage or longer runs.Casting Stand and Combs

Specifications of Labnet Enduro Page 2d System E2010-P2:

Enduro PAGE System:
Gel Dimensions:	10 x 10 cm
Capacity:	2 gels/run*
Maximum samples:	20 per gel
Tank (WxDxH):	19 x 13 x 15 cm
Buffer volume:	250 mL
Enduro PAGE Electroblotting System:
Gel Dimensions:	NA
Capacity:	3 gels/transfer
Maximum samples:	NA
Tank (WxDxH):	19 x 13 x 15 cm
Buffer volume:	1200 mL
Enduro PAGE 2D System:
Gel Dimensions:	8 cm long
Capacity:	10 tubes/run
Maximum samples:	10 (1/gel)
Tank (WxDxH):	19 x 13 x 15 cm
Buffer volume:	500 mL

Features of Labnet Enduro PAGE 2D System:

• Modular Design
• PAGE, Electroblotting and 2D Electrophoresis
• Quick and easy set up
• Wide range of accessories

We offer complete line of Labnet Laboratory Apparatus. For our complete selection of products by Labnet on sale please visit our Labnet page. For more Laboratory Apparatus please visit our Laboratory Apparatus store section.