Product Category Description:

Bulk powder enclosures keep airborne particulates and fumes contained during powder transfer operations. Airfoils with Clean-Sweep* openings enhance airflow and a zone-perforated rear baffle creates a horizontal laminar airflow to maximize containment. A 30.5cm (12") sash operating height and the ample interior height can accommodate large micro or analytical balances. Angled sash is constructed of 0.6cm (1/4") thick tempered safety glass that is hinged to pivot up and lock for loading. Enclosures feature two utility ports, upper dilution air supplies, and upper containment sash foils. Enclosures incorporate a low-profile design and are equipped with side-entry airfoils, built-in top-mounted airflow monitor, and left side-mounted waste chute. Sides and top are constructed of 0.6cm (1/4") thick non-static producing tempered safety glass that provides excellent visibility, ambient light, and protection. Sturdy dry-powder and epoxy-coated aluminum frame and steel rear panel and baffle support the enclosure. A push-button hydraulic lift mechanism raises the container to the optimal height. An electronic beam senses the location of the container and triggers the lift mechanism to automatically stop at the optimal access height. Three 5.1x25.4cm (2x10") rectangular openings may be used to attach the enclosure to a remote blower or portable exhauster.

Enclosures also feature a built-in Guardian* 1000 digital airflow monitor. If the face velocity falls below the setpoint for more than six seconds, an audible alarm sounds and a red light glows. The alarm can be muted. Airflow monitor features an LCD display of actual face velocity and an RS-232 port. Retaining rings are constructed of Type 304 stainless steel. One retaining ring is required; it should be slightly larger than diameter of source container and a minimum of 5.1cm (2") smaller than the inner bag diameter. Polyethylene safety sleeves are fastened with a retaining band to the outside of the source container and access opening to help contain powders for easy clean up. The access opening cover provides a solid work surface. An extra transfer caddy is available to provide for easier material handling.

All stations conform to modified ASHRAE 110-1995 standards, SEFA 1-2002 standards, and ANSI Z9.5-1-993 standards. The 115V models are ETL listed; the 230V models are CE marked.

Ordering Information: Enclosures are supplied with a transfer caddy with 7.6cm (3") casters. All enclosures require ducting to house exhaust, remote exhaust, or FilterMate* portable exhausters (see 82010-632 series).

Specifications for Labconco XPert Bulk Powder Enclosures, Labconco 3963500 :

NominalWidth,m (ft.):		1.5 (5)
Electrical:		115V, 60Hz
LiftLocation:		Left
Interior Dimensions,W x D x H, cm (in.):		146.4 x 76.2 x 81.3 (575/16 x 30 x 32)
Exterior Dimensions,W x D x H, cm (in.):		155.7 x 94 x 191.8 (615/16 x 37 x 751/2)
ShippingWeight,kg (lbs.):		136 (300)
Labconco No.:		3963500

(Please note that the description and stock photo may not correspond to the specific model listed above)

We offer only genuine Labconco products, authorized for sale in the U.S. and other markets, so you can be sure that you are buying authentic Laboratory Furniture and Biosafety Cabinets with a full manufacturer's warranty in addition to our own 100% Satisfaction Guarantee. We are your premier online distributor for Labconco Laboratory Furniture and Biosafety Cabinets. We are an authorized supplier to all federal and state government agencies, as well as to research and educational institutions, and can facilitate volume orders on many types of laboratory equipment, lab consumables, and other products to help fulfill your specific needs. We offer Free Shipping and FREE USPS shipping to APO and FPO addresses on all orders in our store over $29.95. Please refer to our APO/FPO Shipping and Export Restrictions for more information on export to APO/FPO addresses.

In addition to the Labconco XPert Bulk Powder Enclosures, Labconco 3963500/ 93000-374, we carry a full complement of Laboratory Furniture and Biosafety Cabinets as well as other product offerings from Labconco. We also carry a full line of Labconco accessories to help meet your laboratory and scientific needs.

For a complete selection of Labconco Laboratory Furniture and Biosafety Cabinets, please visit our Labconco page. For more brand name Laboratory Furniture and Biosafety Cabinets please visit our Laboratory Furniture and Biosafety Cabinets store section. To see our complete line of lab, medical, industrial, and scientific products, please see our science and lab equipment online catalog.