Labconco FlaskScrubber Washers, Labconco Mobile Flaskscrubber is a reliable and dependable addition to the Labconco Laboratory Furniture and Biosafety Cabinets family of products. Combining top-notch and uncompromising quality with an affordable price, the Labconco FlaskScrubber Washers, Labconco Mobile Flaskscrubber 4420000/ 66075-055 can fulfill your laboratory needs while still offering a great value for the money.

Product Category Description:

More economical than hand washing, the FlaskScrubber is designed to clean flasks, beakers, and other types of specialized glassware. The unit features a powerful steam cycle that penetrates hard to reach places and removes dried and baked-on contaminants. Throughout the cleaning cycles, the FlaskScrubber is continuously heating, thus boosting water and glassware temperatures and improving drying results.

Tank, wash arm, and tower are constructed of Type 304 stainless steel. Fiberglass blanket and aluminum-backed acoustic material provide double insulation for heat retention and low noise levels. The washer includes a motor that recirculates up to 60 gallons of water per minute throughout the tank, purified water pump, steam generator, and detergent and neutralizing rinse solution dispensers. Drying is accomplished by 1450W vacuum system that draws moist air through spindles and manifold and replaces it with hot air. Microprocessor control with liquid crystal display has five factory preset programs, which may be altered for specific requirements by changing wash and dry times and number of rinses. Two additional unique programs may be created and stored for repeated use. Cycles include multiple tap or purified water rinses and heat or non-heated drying. Enhanced washing and drying results can be obtained with 2150W of heating power on 230V models.

The FlaskScrubber can be accessorized with inserts to hold pipets, an upper spindle rack, or an adjustable height top rack for other specialized glassware (see 66074-915 series). Each washer comes with a 34-pin lower spindle rack, two 10.2cm (4") glassware holders, two 15.2cm (6") glassware holders, and 1.9cm (3/4") hose barb for connection to a purified water source. The front door on all the washers is brushed stainless steel. Mobile and freestanding models also have brushed stainless steel sides, an epoxy-coated steel back, and a melamine top. Washers with a viewing window in the door have a 25W interior light that illuminates the tank while the latch is locked. An accessory stand (66074-910) is available for freestanding models; see 66074-915 series. ETL and ETL-C listed. CE marked.

Ordering Information: One-year manufacturer’s parts and labor warranty. The 115V, 60Hz mobile FlaskScrubbers (66075-055, -059) are supplied with top, side, and back panels, four 5.1cm (2") rubber casters, two aerator adapters for faucet, electrical cord, and 20A plug. These washers require a 20A dedicated circuit. The 230V, 50/60Hz mobile FlaskScrubbers (66075-057, -061) include everything listed for the 115V models except the 20A plug. These washers require a 20A dedicated circuit and a 20A plug.

Undercounter FlaskScrubbers are supplied with a 9.5mm (3/8") IPS valve inlet for tap water and leveling feet. Both voltage models require hard wiring to a dedicated 20A circuit and require a 3.8cm (11/2") vent trap or drain air gap.

Freestanding FlaskScrubbers are supplied with top, side, and back panels; 9.5mm (3/8") IPS valve inlet for tap water; and leveling feet. Both voltage models require hard wiring to a dedicated 20A circuit and require a 3.8cm (11/2") vent trap or drain air gap. For additional accessories, see 66074-915 series.

Specifications for Labconco FlaskScrubber Washers, Labconco 4420000 Mobile Flaskscrubber:

Description:		Mobile FlaskScrubber
Electrical:		115V, 60Hz
Labconco No.:		4420000
Unit:		Each
Dimensions, Mobile FlaskScrubber:		62.2W x 67.6D x 93H cm (241/2 x 265/8 x 365/8")
Dimensions, Undercounter FlaskScrubber:		61W x 65.1D x 87.9H cm (24 x 255/8 x 345/8")
Dimensions, Freestanding FlaskScrubber:		62.2W x 67.6D x 89.9H cm (241/2 x 265/8 x 353/8")

(Please note that the description and stock photo may not correspond to the specific model listed above)

We offer only genuine Labconco products, authorized for sale in the U.S. and other markets, so you can be sure that you are buying authentic Laboratory Furniture and Biosafety Cabinets with a full manufacturer's warranty in addition to our own 100% Satisfaction Guarantee. We are your premier online distributor for Labconco Laboratory Furniture and Biosafety Cabinets. We are an authorized supplier to all federal and state government agencies, as well as to research and educational institutions, and can facilitate volume orders on many types of laboratory equipment, lab consumables, and other products to help fulfill your specific needs. We offer FREE UPS Ground Shipping and FREE USPS shipping to APO and FPO addresses on all orders in our store over $29.95. Please refer to our APO/FPO Shipping and Export Restrictions for more information on export to APO/FPO addresses.

In addition to the Labconco FlaskScrubber Washers, Labconco Mobile Flaskscrubber 4420000/ 66075-055, we carry a full complement of Laboratory Furniture and Biosafety Cabinets as well as other product offerings from Labconco. We also carry a full line of Labconco accessories to help meet your laboratory and scientific needs.

For a complete selection of Labconco Laboratory Furniture and Biosafety Cabinets, please visit our Labconco page. For more brand name Laboratory Furniture and Biosafety Cabinets please visit our Laboratory Furniture and Biosafety Cabinets store section. To see our complete line of lab, medical, industrial, and scientific products, please see our science and lab equipment online catalog.

Labconco FlaskScrubber Washers, Labconco 4420000 Mobile Flaskscrubber Rating & Reviews